Details
Push-pull set
Bundling two NF-A14x25r G2 PWM fans that are speed-offset by +/- 25rpm in order to avoid undesired acoustic interaction phenomena, the Sx2-PP set is the ideal choice for push-pull configurations on 140mm class coolers such as the NH-D15(S) or NH-U14S.
Next-generation performance
Noctua’s NF-A15 is renowned as being among the best round-frame 140mm fans on the market and has received more than 100 awards and recommendations from the international press. With its further improved efficiency and novel, state-of-the-art engineering, the NF-A14x25r G2 represents another step up in performance and manufacturing.
Highly optimised P/Q curve for all applications
The NF-A14x25 G2’s sophisticated aerodynamic design allows for a pressure to airflow (P/Q) curve that is extremely strong in the critical mid-section. This means that the NF-A14x25 G2 is a true jack-of-all-trades with excellent performance in both static pressure demanding and airflow demanding applications.
Excellent on-application acoustics
While many fans produce unpleasant, high-pitched noises when installed in typical applications such as on heatsinks or radiators, the NF-A14x25 G2 has been carefully fine-tuned for optimal on-application acoustics. It produces a smooth, pleasant frequency profile and surprisingly low sound pressure levels (SPL) when working against back pressure.
Progressive-Bend impeller
The NF-A14x25 G2 features a unique Progressive Bend Impeller with Flow Acceleration Channels and winglets. Its nine blades are swept backwards close to the hub and progressively bent forward further out. Working in tandem with the Centrifugal Turbulator hub, this design not only helps to push more air towards the outer blade areas where efficiency is higher but also assures maximum lift and near uniform loading across the entire blade span.
Centrifugal Turbulator hub
Acting as a turbulator, the new Centrifugal Turbulator hub design improves flow attachment in the hub region. At the same time, it’s centrifugal driving motion pushes air outwards from the hub area where efficiency is low due to the slow rotational speed towards the outer, high-efficiency zones of the blades, thereby increasing overall efficiency by optimising fluid distribution across the impeller area.
Flow Acceleration Channels
The NF-A14x25 G2 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.
Winglets
Winglets can help to reduce tip vortices that are caused by the pressure differential between the suction and the pressure side of fan blades but bear the risk of reducing efficiency due to extra fluid displacement in high velocity regions. The NF-A14x25 G2’s small winglets have been carefully fine-tuned to provide consistent efficiency gains working in tandem with its Progressive-Bend blade geometry, Flow Acceleration Channels and AAO frame.
Ultra-tight tip clearance
The NF-A14x25 G2 has a record tight tip clearance (distance between the blade tips and the inside of the frame) of only 0.7mm. This highly ambitious design sets a new benchmark for 140mm fans and helps the NF-A14x25 G2 to work more efficiently against back pressure, such as on heatsinks or radiators, by reducing leak flows through the gap between impeller and frame.
Sterrox® liquid-crystal polymer compound
The NF-A14x25 G2’s impeller is made from Noctua’s novel Sterrox® liquid-crystal polymer (LCP) compound that features extreme tensile strength, an exceptionally low thermal expansion coefficient and damping characteristics that are ideal for reducing resonance and vibration phenomena in advanced fan-blade designs.
AAO frame
Noctua's AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua's proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan's performance/noise efficiency.
Stepped Inlet Design
Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.
Inner Surface Microstructures
With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.
Integrated anti-vibration pads
Integrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and most other mounting mechanisms.
SSO2 bearing
The NF-A14x25 G2 features the further optimised second generation of Noctua's renowned, time-tested SSO2 bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.
Metal bearing shell
In order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the NF-A14x25 G2 sports a CNC milled bearing shell made entirely from brass.
etaPERF™ motor with NE-FD6 PWM IC
Noctua’s new etaPERF™ motor sets new standards in energy efficiency thanks to its extremely low electric impedance and the latest NE-FD6 drive system with its integrated, ultra-sensitive Hall effect sensor that provides super-precise commutation performance. This not only enables it to convert a minimal electric input into a maximum power-output with hardly any losses, but also works in tandem with Noctua’s proven Smooth Commutation Drive 2 technology to make the etaPERF™ motor run near-inaudible.
SupraTorque™
Most fans become slightly slower when working against back pressure such as on heatsinks and radiators, which results in reduced performance. Enabled by the new NA-FD6 driver IC, Noctua’s SupraTorque™ technology allows the fan to leverage additional torque headroom when required in order to keep its RPM speed at the desired level no matter the airflow resistance, ensuring consistent performance even in the most demanding conditions.
PWM control with wide speed range
The NF-A14x25 G2 PWM can be PWM-controlled from its maximum speed of 1500rpm all the way down to 300rpm. This makes it possible to adjust the fan for maximum performance or near-silent operation using either automatic, temperature-based motherboard speed control or manual controllers such as the NA-FC1.
Stops at 0% PWM
When the fan is set to 0% PWM duty cycle by the motherboard or PWM fan controller, it will stop. This makes it ideal for creating setups with semi-passive cooling that automatically turn the fans off and thus run completely silent at idle if thermals allow.
Smooth Commutation Drive 2
The latest version of Noctua's advanced Smooth Commutation Drive system ensures superb running smoothness by eliminating torque variations and switching noises. This makes the fan remarkably quiet even at very close distances.
Low-Noise Adaptor
The NF-A14x25 G2 PWM is supplied with a Low-Noise Adaptor (L.N.A.) that reduces the maximum fan speed from 1500 to 1250rpm. The L.N.A. can be used either to run the fan at a fixed speed of 1250rpm or to cap the maximum speed when using automatic PWM control.
Advanced protection features
Protected against reverse polarity, over voltage and over current (short-circuits), the fan is suitable for use in challenging electrical environments. At the same time, its ultra-low EMC emissions make it ideal for applications where electrical interference is critical. Last but not least, its locked rotor and overloading protection add extra safety in situations where the fan may be blocked mechanically.
Extensive cabling options
The fan's short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows the connection of a second fan to the same PWM fan header for automatic control.
Safety certifications
Unlike many cheap fans, the NF-A14x25 G2 has been thoroughly tested for electrical safety, immunity and radiated emission. Carrying CE, TÜV, UKCA and UL certifications and meeting all applicable standards (EN 62368-1, EN 55035, EN 55032, UL-507), it is a safe, quality device through and through.
6-year manufacturer’s warranty
Noctua fans are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the NF-A14x25 G2 features an MTTF of more than 150,000 hours rating and comes with a full 6-year manufacturer’s warranty.
Product Details
Notes and warnings
Further reading:
- NF-A14x25(r) G2 performance: improvements for heatsinks, radiators and cases
- NF-A14x25(r) G2 aerodynamic design innovations: the keys to its superior performance
- etaPERF™ motor: new standards in energy efficiency
- SupraTorque™: leveraging torque headroom to boost pressure performance
FAN Specification
Size : 140x140x25 mm
Mounting hole spacing : 105x105 mm
Connector & pin-configuration : 4-pin PWM
Cable length : 20cm + 30cm NA-EC1 extension cable
Bearing : SSO2
Blade geometry : Progressive-Bend impeller
Frame technology : AAO (Advanced Acoustic Optimisation)
Material : Sterrox® LCP
Rotational speed (+/- 10%) : 1500 RPM
Rotational speed with L.N.A. (+/- 10%) : 1250 RPM
Airflow with L.N.A. : 127,1 m³/h
Acoustical noise : 24,8 dB(A)
Acoustical noise with L.N.A. : 19,7 dB(A)
Static pressure : 2,56 mm H₂O
Static pressure with L.N.A. : 1,3 mm H₂O
Input power (max.) : 2,28 W
Max. input current : 0,19 A
Operating voltage : 12 V
Voltage PWM signal : 5 V
MTTF : > 150.000 h
Scope of delivery
- NF-A14x25r G2 PWM PPA
- NF-A14x25r G2 PWM PPB
- 2x NA-RC16 Low-Noise Adaptor (L.N.A.)
- NA-YC1 4-pin PWM splitter cable
- 2x NA-EC1 30cm extension cable
- 8x NA-AV2 anti-vibration mounts
- Fan screws
Warranty : 6 years
・EAN: 9010018100662
・梱包サイズ: 33x369x148 mm(HxWxD)
・梱包重量: 546 g
・商品は画像と多少異なる場合がございます。
Further reading:
ノクチュア Noctua NF-A14x25r G2 PWM Sx2-PP 140mm ファン
- ブランド: Noctua
- 品番: NF-A14x25r G2 PWM Sx2-PP
- 在庫: お問い合わせ下さい
-
¥9,787
- 税別: ¥8,897
関連商品
ノクチュア Noctua NF-A14 - industrialPPC-3000 140mm PWM ファン
140x140x25mm PWM仕様 3000-800rpm / 269.3 m³/h MAX / 10.52 mm H2O MAX 41.3dB(A) MAX IEC規格 IP52対応..
¥3,999 税別: ¥3,635
Noiseblocker NB-BlackSilentファン XK1 (140mm)
※他サイトでも販売しておりますので、「在庫あり」と表示されていても売切れの場合がございます。 ご容赦ください。 商品番号:24676 EAN:4250051906141 重..
¥1,816 税別: ¥1,651
Noiseblocker NB-BlackSilent XK2ファン (140mm)
※他サイトでも販売しておりますので、「在庫あり」と表示されていても売切れの場合がございます。 ご容赦ください。 メーカーP/N: NB-BlackSilentファン XK..
¥1,816 税別: ¥1,651
ACool NexXxoS ST30 全銅製 140mm ラジエーター V.2
商品番号:1015509 メーカー番号:14555 EAN: 4250197145558 重さ: 0,604 Kg 商品は画像と多少異なる場合がございます。..
¥9,065 税別: ¥8,241
ACool NexXxoS XT45 全銅製 140mm ラジエーター V.2
商品番号: 14285 EAN: 4250197142854 重さ: 0,845 kg 商品は画像と多少異なる場合がございます。..
¥10,391 税別: ¥9,446
ノクチュア Noctua NH-D15 G2 HBC Dタイプ プレミアム CPUクーラー
・EAN: 9010018000436 ・梱包サイズ: 239x188x188 mm(HxWxD) ・梱包重量: 2460 g ・商品は画像と多少異なる場合がございます。 ..
¥23,195 税別: ¥21,086
ノクチュア Noctua NH-D15 G2 デュアルタワー CPUクーラー
・EAN: 9010018000405 ・Packaging dimensions: 239x188x188 mm(HxWxD) ・Weight incl. packaging: 246..
¥23,195 税別: ¥21,086
ノクチュア Noctua NH-D15 G2 LBC Dタイプ プレミアム CPUクーラー
・EAN: 9010018000429 ・梱包サイズ: 239x188x188 mm(HxWxD) ・梱包重量: 2460 g ・商品は画像と多少異なる場合がございます。 ..
¥23,195 税別: ¥21,086
ノクチュア Noctua NF-A14x25r G2 PWM 140mm ファン
・EAN: 9010018100648 ・梱包サイズ: 33x199x148 mm(HxWxD) ・梱包重量: 340 g ・商品は画像と多少異なる場合がございます。 ..
¥5,144 税別: ¥4,676