Blog

Product information "AM5 Mycro Direct-Die - Without LED"

The AM5 Mycro Direct-Die from Thermal Grizzly is a direct-die water cooler for AMD's Ryzen 7000 processors. As the name already suggests, the water cooler lies directly on the chiplets of the delidded Ryzen CPU. This makes the path from the CPU die to the water circuit much shorter. Micro fins on the top of the nickel-plated copper cooler are used for optimal transfer of waste heat. The AM5 Mycro Direct-Die is integrated into the circuit of a custom water cooling system via G1/4-inch connections.

Nickel-plated copper radiator with microfin structure

The AM5 Mycro Direct-Die replaces the motherboard's Socket Actuation Mechanism (SAM) and the heatspreader of the Ryzen 7000 processor. Thus, the processor has to be delidded. On the significantly larger surface of the nickel-plated copper heatspreader compared to the stock heatspreader, there are optimized microfins that dissipate the waste heat extremely effectively into the water circuit of the custom cooling loop. At the same time, optimal contact pressure of the CPU into the socket is enabled. The lid is made of CNC-milled polyoxymethylene (POM) and is equipped with one inlet and outlet each in the form of G1/4-inch threads.

  • Water cooler for direct die mounting
  • Microfin cooler made of nickel-plated copper
  • Replaces SAM and heatspreader
  • CNC machined POM cover
  • G1/4 inch connections
  • Only for delidded CPUs!

Maximum cooling performance

In tests**, the AM5 Mycro Direct die in combination with Conductonaut Extreme could establish itself as the high-end solution with the best temperatures. A Ryzen 7900X (5.0 GHz, 1.3 vCore) was cooled down to 64 °Celsius under load during testing. Compared to an everyday solution in the form of a 280 mm AiO, temperatures could be lowered by up to 26 °Celsius in comparable test sections. A comparable water cooler reached via Direct-Die temperatures that were 3 °Celsius higher than the AM5 Mycro Direct-Die. The AM5 Mycro Direct-Die's nickel-plated surface is compatible with traditional thermal pastes and gallium-based liquid metals. The nickel forms a barrier layer between the liquid metal and the copper cooler, preventing liquid metal from diffusing into the copper and minimizing alloying. As a result, multiple applications of liquid metal are generally not necessary. For the lowest maintenance system possible, a KryoSheet graphene thermal pad can be used as the thermal interface between the CPU and the AM5 Mycro Direct Die. Since KryoSheet pads are electrically conductive, a cover is included to protect the electronic components on the CPU package. Temperatures below 70 °Celsius were measured with a KryoSheet in the tests**.**It should be noted that the temperature improvements achieved depend on several factors. Besides the quality of the individual processors ("Silicon Lottery"), test results are influenced by the room temperature and the cooling used, among other things. For an AiO, for example, the cooling performance depends on factors like the pump speed as well as the fans used. The values given are guidelines that can be higher or lower in individual cases.

Attention: Removing the heatspreader (“delidding”) of a processor is at your own risk! The manufacturer's warranty expires when the CPU is delidded! Damage caused by delidding the CPU is not covered by the manufacturer's warranty!

Removing the Socket Actuation Mechanism (SAM) of the mainboard may invalidate the manufacturer's warranty of the mainboard manufacturer!

Ryzen 8X00G Compatibility

Attention: The Mycro Direct-Die is NOT COMPATIBLE with the APUs of the Ryzen 8000G series! For more information on the compatibility of the AMD Ryzen 5 8500G, AMD Ryzen 5 8600G and AMD Ryzen 7 8700G with our products, please watch the following video: “AMD Ryzen 8000 Delidded - Liquid Metal Changes Everything!”

Note on Ryzen 9000 compatibility

According to initial internal tests, the AM5 Mycro Direct Die is compatible with AMD's Ryzen 9000 processor series. The compatibility test only includes the normal 9000 CPUs. Ryzen 9000X3D CPUs will be tested as soon as available.

Scope of Delivery

  • 1x AM5 Mycro Direct-Die
  • 1x Insulation sheet
  • 1x pressure test report to 600 mbar
  • 4x pan-head screws UNC thread 1/4"
  • 1x hexagon socket wrench 5/64"
  • 1x angle wrench Torx T20
 
Color: black, silver
Material: POM, acetal, nickel-plated copper
Pressure tested up to: 600 mbar
Socket manufacturer: AMD
Socket type: AM5
Threading: G1/4" female
 
The AM5 Mycro Direct-Die is a water cooler for AMD Ryzen 7000 CPUs. The water cooler lies directly on the chiplets of the delidded (beheaded) Ryzen CPU and shortens the path to the water circuit. In addition, the micro fins support the transport of excess heat.

レビューを書く

注意: HTMLタグは使用できません!
   悪い           良い

Thermal Grizzly AM5 Mycro Direct-Die

  • ¥16,618

  • 税別:¥15,107

タグ: Thermal Grizzly AM5 Mycro Direct-Die