Bionic Rotor Blade (New)
The novel design eliminates the edge vortices that are formed between the suction and pressure sides of the wing tips. The edge vortices are hereby broken down into smaller edge vortices and evenly distributed. Vorticity Guides minimize the marginal vortices at the trailing edges of the leaves. The result is a significant improvement in the glide ratio, which leads to a reduction in the aerodynamic flow noise and improves energy efficiency.
Dust-resistant, super-smooth surface, original Bayer Makrolon® material.

• Aerodynamically optimized outflow field
• 4 resonance / interference absorber (Deepsound Design)
• Enlarged inflow field by diagonal construction
• Superlinear power output over the entire speed range, volume flow optimized
• Glass-fiber reinforced material-massed frame made of PBT UL94V0 30% GF

• Autorestart function for safe startup.
• integrated blocking and overload protection.
• Scalable NB-WideRange electronics
• low starting voltage
• Rpm lead
• AntiDust technology (completely dust-proof engine)

• In-situ lubrication and noise reduction vertical and horizontal operation without increasing the volume
• AntiDust technology (completely dust-proof bearing)
• Special lubrication with NanoTechnology for high durability and low operating noise

NB cable
management Plug-in jacked connection cables, each 1x 20cm + 50cm

Vibration-free mounting
The included 12-piece mounting kit allows a vibration-free mounting, which lowers the operating volume when installed.

Specifications:
Dimensions: 120x120x25mm
Weight: 123g
Rated voltage: 12V Starting voltage:
6.2 volts
Power consumption: 0.95Watt Rated
speed: 400 - 1500 (+/- 10%)
Pressure: <1.475mmH2O Air flow rate
: <98.7 m3 / h
Volume : <21.2 dB / A
MTBF (25 ° C): 140 000 hours
Connection: 4 pin PWM Molex with speed signal line
Guarantee: 6 years
 

DataSheet

Scope of delivery:
1x Noiseblocker NB-eLoop B12-PS Bionic fan (120x120x25mm)
2x sheathed connection cable (20 + 50cm)
12-piece mounting kit for vibration-free mounting