Blog
The NV-FS1 is a highly versatile, premium grade multi-purpose fan set that can be used for a wide range of ventilation tasks such as desk and room fan applications or device cooling. Pairing the award-winning NF-A12x25 PWM 120mm fan with the NV-AA1 airflow amplifier guarantees exceptional quiet cooling performance and a strong, focused stream of air that can be adjusted as required using the included NA-FC1 speed controller. The set’s centrepiece is the sturdy, steel-made NV-FM1 pivoting fan mount that makes it possible to let the fan blow at any angle, such as upwards, downwards, or sideways. With its integrated magnets, zip-tie slots and screw mounting holes, it’s easy to install virtually anywhere. Thanks to the NV-FM1’s integrated vibration dampening, vibrations are supressed from the ground up and the pre-installed NA-FG1 fan grill prevents the fan from accidental touch. For powering and connecting the fan, the set includes Noctua’s NV-PS1 230/115V high quality universal power supply as well as an NV-EC4 1m extension cable that can be installed before or after the fan controller depending on individual preferences. In sum, the NV-FS1 is a comprehensive premium package that ticks all the boxes for various home, office and multi-purpose ventilation tasks.

Award-winning NF-A12x25 120mm fan

Award-winning NF-A12x25 120mm fan

Having received more than 100 awards and recommendations from international PC hardware websites and magazines, Noctua’s NF-A12x25 has set a new benchmark for 120mm computer fans. Its state-of-the-art construction, superior efficiency and superb quietness of operation also make it an ideal choice for demanding home, office and multi-purpose ventilation tasks.

Airflow amplifier for enhanced ventilation performance

Airflow amplifier for enhanced ventilation performance

The pre-installed NV-AA1-12 airflow amplifier has been developed to boost the NF-A12x25’s flow performance in typical desk and room ventilation applications. Thanks to a three-way airflow amplification system that combines helix energy recovery, progressive flow acceleration, and Venturi effect volume enhancement, the NV-AA1 enables the fan to create a strong, focused beam of air while maintaining exceptional quietness of operation.

Sturdy, pivoting fan mount with flexible mounting options
Sturdy, pivoting fan mount with flexible mounting options

Forming the centrepiece of the NV-FS1 set, the sturdy, steel-made NV-FM1 is a highly versatile, pivoting multi-purpose mount for 120 and 140mm fans. It cannot only be used as a simple stand on desks or other level surfaces, but can also be fixed to walls, ceilings, furniture, or other objects using the screw-mounting holes and zip-tie slits at the base..

3 level anti-vibration design
3 level anti-vibration design

The NV-FS1 set reduces vibrations on three levels: Firstly, the fan is pre-installed to the NV-FM1 using silicone push-pins. Secondly, the rubber hinges of the NV-FM1 prevent vibrations from being transmitted to the base and thirdly, the rubber strips at the base reduce the transmission of vibrations to the mounting surface..

Stepless PWM fan controller

Stepless PWM fan controller

For convenient stepless speed control, the NV-FS1 includes Noctua’s popular NA-FC1. This small but powerful fan controller with status LEDs makes it possible to adjust the fan from maximum airflow performance all the way to near-inaudible operation. It can also stop the fan completely.

High-quality 230/115V power supply
High-quality 230/115V power supply

Installing the NV-AA1 couldn’t be easier: First, remove the fan’s pre-installed anti-vibration pads on the outlet side of the fan and replace them with the NA-AVG1 anti-vibration gasket that came with the fan so that there will be no gap between the fan and the NV-AA1. Then, screw-fix the NV-AA1 to the fan’s mounting holes using the supplied screws.

Flexible cabling

Flexible cabling

In addition to the 135cm cable of the NV-PS1 power supply, the 30cm long NA-AC10 adaptor for fan connection and the fan’s 20cm primary cable, the NV-FS1 set includes an NV-EC4 1m extension cable that increases the total reach to 2.85m. The NA-FC1 controller can be placed before or after the extension cable for maximum flexibility.

Fully modular and expandable
Fully modular and expandable

Thanks to the modularity of Noctua’s HOME line product ecosystem, the NV-FS1 set can be easily expanded. For example, additional fans and fan mounts can be powered from the same power supply and controlled using the same NA-FC1 controller using splitter cables (NA-SYC1) or fan hubs (NA-FH1/NV-FH2). It’s also possible to add additional NA-SEC3 extension cables.

Protection and safety


Protection and safety

For protection against accidental touch, the NV-FS1 set comes with an NA-FG1-12 fan grill pre-installed. The included NV-PS1 power supply is protected against overvoltage, overcurrent and short-circuits and both the power supply and the fan carry safety certification from UL and TÜV. Unlike many cheap fans and power supplies, they are fully CE/UKCA compliant and meet all applicable standards for EMC and safety.

6 years manufacturer’s warranty
6 years manufacturer’s warranty

Noctua products are renowned for their impeccable quality and outstanding longevity. Like all of them, the NV-FS1 set is built to last and all the included parts are covered by Noctua’s 6-year manufacturer’s warranty..

 

Colour :Black

Height :154 mm

Width:153 mm

Depth :121mm

Weight :770 g

Fan Cable length :Noctua NF-A12x25 PWM chromax.black 2.85m (20cm fan cable, 135cm NV-PS1, 30cm NA-AC10, 100cm NV-EC4-1m)

Warranty:6 years

Write a review

Note: HTML is not translated!
   Bad           Good

Noctua NV-FS1 multi-purpose fan set (Black)

  • Brand: Noctua
  • Product Code:NV-FS1
  • Availability:In Stock
  • ¥16,504

  • Ex Tax:¥15,004

Tags: Noctua NV-FS1 multi-purpose fan set (Black)