詳細
|
|
Award-winning NF-F12 design Having received more than 150 awards and recommendations from the international press, Noctua's NF-F12 has become a proven premium choice for 120mm cooling needs. Its renowned efficiency has convinced tens of thousands of customers all over the world. |
|
|
|
2000rpm industrialPPC version Running twice as fast as the 1500rpm retail version, the NF-F12 industrialPPC-2000 PWM provides extreme airflow and pressure performance. Combined with the industrialPPC series' robust polyamide construction and advanced protection features, this makes the fan ideal for challenging industrial applications. |
|
|
|
24V version The industrialPPC 24V Q100 models use Noctua's NE-FD4 three-phase PWM motor driver IC. Supporting operating voltages from 12 to 30V, these models are ideal for 24V-based industrial applications and voltage- or PWM-based speed control. |
|
|
|
Lower speed and noise levels in 12V PC environments While the industrialPPC 24V model has been designed with 24V industrial applications in mind, it runs at a maximum speed of around 1600rpm in 12V PC environments and can be slowed down further via PWM, thus combining industrialPPC features and design with Noctua’s signature quietness. |
|
|
|
NE-FD4 PWM IC with SCD Supporting fully automatic PWM speed control, the fan uses Noctua’s custom-designed NE-FD4 PWM IC for 24V three-phase motors. The NE-FD4 is AEC-Q100 qualified and integrates Noctua's proprietary Smooth Commutation Drive (SCD) technology, which suppresses PWM switching noise and thus makes the fan quieter at lower speeds. |
|
|
|
AEC-Q100 qualification The 24V Q100 version’s NE-FD4 motor driver IC complies with the Automotive Electronics Council’s highly rigorous AEC-Q100 failure-mechanism-based stress test qualification for integrated circuits, which makes the fan ideal for use in automotive applications. |
|
|
|
High electrical robustness Meeting the AEC-Q100 standard’s stringent requirements for burst and surge protection, the 24V Q100 version’s high electrical robustness permits the fan to be used not only in automotive projects but also in other harsh environments with transients from electric motors and other inductive switching loads. |
|
|
|
Inrush current suppression The fan’s voltage-stabilised inrush current suppression provides a smooth power-up and dramatically reduces power line transients that otherwise could affect other electronic components connected to the power line. This makes the fan safe to use in sensitive electronic environments. |
|
|
|
Three-phase motor design While most axial fans use single-phase motors with 4 slots, Noctua's industrialPPC fans feature a three-phase design with 6 slots, which provides smoother transitions between the slots and thus allows for even higher running smoothness, further reduced vibrations and unprecedented energy efficiency. |
|
|
|
Certified IP67 water- and dust protection The motor and PCB of the IP67 version are completely cast in a special, highly heat conductive resin that combines thoroughgoing protection and effective motor heat dissipation. Complying with the ingress protection rating IP67, this fan is not only fully dust tight but also completely waterproof up to 1m water depth. |
|
|
|
Fibre-glass reinforced polyamide construction Both the impeller and the frame of Noctua’s industrialPPC fans are made entirely from fibre-glass reinforced polyamide. This material can withstand temperatures up to 140°C and makes the fans even more robust and break-proof than Noctua’s standard fibre-glass reinforced PBT fans. |
|
|
|
Focused Flow™ frame Designed for pressure demanding applications such as heatsinks and radiators, the Focused Flow™ frame features eleven stator guide vanes that straighten, channel and focus the airflow, which allows the NF-F12 to rival the performance of conventional fans running at much faster speeds. |
|
|
|
Varying Angular Distance and Vortex Control Notches The NF-F12's stator guide vanes are set out in Varying Angular Distance and feature Vortex-Control Notches. Both measures help to spread the noise emission over a broader frequency spectrum and thus make the fan's sound pattern more agreeable to the human ear. |
|
|
|
Heptaperf™ Impeller Custom designed for the new Focused Flow™ frame and to work in tandem with the eleven stator guide vanes, the NF-F12's seven blade Heptaperf™ impeller has been carefully optimised to achieve a perfect balance between power and quietness. |
|
|
|
Stepped Inlet Design Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments. |
|
|
|
Inner Surface Microstructures With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency. |
|
|
|
Integrated anti-vibration pads Integrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems. |
|
|
|
SSO2 Bearing The NF-F12 industrialPPC features the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability. |
|
|
|
Metal bearing shell In order to guarantee the highest possible degree of manufacturing precision, minimum tolerance and excellent long-term stability, the NF-F12 industrialPPC sports a CNC milled bearing shell made entirely from brass. |
|
|
|
6-year manufacturer’s warranty Noctua fans are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the NF-F12 industrialPPC features an MTTF rating of more than 150.000 hours and comes with a full 6-year manufacturer’s warranty. |
|
|
|
Customisable for industry clients For industry clients, various features, certificates, packaging options and accessories can be customised on requests. For example, we can provide different connectors and speeds, different cable length or UL and TÜV certification. Please feel free to contact us for customised offers! |
| Size | 120x120x25 mm |
| Mounting hole spacing | 105x105 mm |
| Connector & pin-configuration | 4-pin PWM |
| Cable length | 40cm |
| Bearing | SSO2 |
| Blade geometry | Heptaperf™ |
| Frame technology | FocusedFlow™ |
| Material | Fibre-glass reinforced polyamide |
| Ingress protection | IP67 |
| Motor type | Three-phase |
| Rotational speed (+/- 10%) | 2000 RPM |
| Min. rotational speed (PWM, +/-20%) | 450 RPM |
| Rotational speed @ 12V (+/- 10%) | 1050 RPM |
| Airflow | 121,8 m³/h |
| Acoustical noise | 29,7 dB(A) |
| Static pressure | 3,94 mm H₂O |
| Max. input power | 1,68 W |
| Max. input current | 0,07 A |
| Operating voltage | 24 V |
| Voltage PWM signal | 5 V |
| MTTF | > 150.000 h |
| Scope of delivery |
|
| Warranty | 6 years |
The Noctua NF-F12 industrialPPC-24V-2000 Q100 IP67 PWM is a rugged 120mm industrial fan designed for demanding cooling applications.
Featuring an AEC-Q100 qualified NE-FD4 motor driver IC, it supports 24V industrial and automotive systems with enhanced electrical robustness, inrush current suppression, and surge protection.
Combining the NF-F12’s efficient aerodynamic design with a three-phase motor, it delivers high airflow and static pressure while maintaining moderate noise and power consumption.
Its IP67-rated dust and water protection, fibre-glass reinforced polyamide construction, SSO2 bearing, and 6-year warranty ensure long-term reliability in harsh environments.
NF-F12 industrialPPC-24V-2000 Q100 IP67 PWM Heavy-duty 24V industrial fan
- Brand: Noctua
- Product Code:NF-F12 industrialPPC-24V-2000 Q100 IP67 PWM
- Availability:In Stock
-
¥3,775
- Ex Tax:¥3,432
Related Products
iStarUSA D-313SE-MATX - 3U Compact Rackmount Chassis ATX Power Supply Compatible
*Power supply unit not included. Please note. Supports Front Access USB2.0 x2 Power and HDD ..
¥31,394 Ex Tax:¥28,540
Tags: Noctua, fan, industrialPPC, PWM, 120mm