The HardTube project becomes reality. Alphacool goes completely new ways and sets clear signs!

The most commonly used method for water cooling is the normal PVC hoses - now Alphacool offers another way to design a water cooling system. The HardTube variant brings even more order into the system which makes a much more structured impression.

The acrylic tube can also be very easily adapted to the system with the appropriate bending tool without having to use additional angle pieces. To install the pipes in the system, this must be sawed to the appropriate length. 

The following variants are available:
HardTube 13 / 10mm acrylic Clear 20cm, 40cm, 60cm and 80cm
HardTube 16 / 12mm acrylic Clear 20cm, 40cm, 60cm and 80cm
(now also available as a set of 4)

 Due to the tubes made to fit the connections must be straight with a little force applied.

Delivery
Alphacools HardTube 13 / 10mm acrylicglass (PMMA) Clear 80cm - Set of 4

Warning: Not compatible with the Monsoon fittings

Attention: The manufacturer Mayhems advises that Mayhem's fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. Thesis should not be used in the system for more than 14 days.

We would like to recommend that Mayhem's Fluid Can Damage Water Cooling Products and Using Mayhems Fluid Can Void the warranties offered by Koolance, Phobya, Alphacool, Aqua Computer, Watercool.

Damages such as: clogging, corrosion of aluminum radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is at one's own risk.