Anyone who want to see clear, clean lines in their computer can hardly go without them.
The most popular HardTubes are clear and transparent.
HardTubes made of brass and carbon are also catching on.
Now, under its "Eis" product line, Alphacool is offering the "Eisrohr".
Its surface gives off the appearance of ice and feels like it too – somewhat rough, but still smooth.
With the "Eisrohr", you effectively change the look of your system.
You can especially see its true effects after refilling the system.
The water has the appearance of frosted ice.
With clear HardTubes, when the system is lit by LEDs, you see the reflection of each individual LED very clearly.
Not so with the "Eisrohr".
Instead, the light is diffused and you get a softer, better illumination.
The "Eisrohr", like all acrylic HardTubes, can be bent with the proper bending tools.
However, this will noticeably change the appearance of the tubes at the bends and no longer creates the same optical effect.
This can be used to create different effects, but if you wish to keep the "Eisrohr" look, appropriate connectors should be used in place of bending.
- Color: Transparent
- Inner diameter: 10mm (3/8")
- Length: 0,80m
- Manufacturer: Alphacool
- Material: PMMA (acryl)
- Max. Operating pressure: 4 Bar (at 20°C)
- Outer diameter: 13mm (1/2")
- Service temperature: -20°C to 60°C
- UV - color: Non UV-active
Scope of delivery:
1x Alphacool Eisrohr 13/10mm plexi (PMMA) satin 80cm - 4pcs
Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes.
These should not be utilized in the system for more than 14 days.
We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.
Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.
|Inner diameter:||10mm (3/8")|
|Max. Operating pressure:||4 Bar (at 20°C)|
|Outer diameter:||13mm (1/2")|
|Service temperature:||-20°C to 60°C|
|UV - color:||Non UV-active|
- Article no.: 1012479
- Manufacturer no.:18510
- EAN: 4250197185103
- Weight: 0,333 Kg
- Images may differ slightly from the original
Alphacool Eisrohr 13/10mm acrylic (PMMA) HardTube satin 80cm - 4pcs
- Brand: AlphaCool
- Product Code: 4250197185103
- Availability: In Stock
- Ex Tax: ¥3,661