Blog

Alphacool's new Laing Low Noise Edition for absolute silence!

The well-known Laing DDC pumps are getting a new addition. Though freshly packaged, this pump can begin its life with lots of self-confidence. A few details have been changed. First, we held back a little in performance in order to solve a widespread problem: the volume! Few other pumps can match this one in terms of reducing noise generation from water. For the most up-to-date water cooling systems with CPU and GPU cooling, this pump should be the first choice.

Unlike before, this pump does not come in the familiar plastic casing. It has an all-new perfectly tailored brass case gracing its exterior. This new case ensures a longer lifespan for the pump. Air flows through the cooling fins, then over an interior thermal pad directly to the pump board. 

Another feature is the included decoupling option. With the special M4 screws, the included decoupling can be screwed into the head of the screws and then attached to the case.

The innovation in this set is that it uses the V.2 of the Alphacool "Eisdecken", which provides you the options of three G1/4" connections for the inlet and two G1/4" connections for the outlet.

Inlet options: front, side, top

Outlet options: front, top

The scope of delivery also includes three G1/4" screw plugs for sealing the unused in/out connection ports.

Another feature is the pre-installed brackets, as seen before on the new "Eisbecher". This allows the pump set to be mounted directly onto the case bottom. 

Now available as a combo with the tried and tested Alphacool Eisdecke Laing DDC Plexi or Acetal Top!

Specification

Collar
black
Power connector 4Pin Molex
Max. Flow 200l/h, Standard (kleiner 500l/h)
Max. Discharge head 2,44m, Gut (2 bis 4m)
Power input 10W
Water outlet Not available
Water inlet Not available
Material
Brass, Hartcoal, Aluminiumoxid
Voltage 12V DC
Durable temperature 60° C
Size 61 x 60 x 21 mm
Weight 0.631 Kg
Approved fluids Water, Water/ glycol mixture
Manufacturer Alphacool
  • Article no.:1012353
  • Manufacturer no.:13197
  • EAN: 4250197131971
  • Weight:  0.631 Kg
  • 商品は画像と多少異なる場合がございます。

Technical Details:

  • Dimensions: 89 x 85 x 75mm
  • Colour: silver / plexi
  • Power consumption: 10W
  • Material: brass, stainless steel, aluminium oxide, hard carbon, plexiglass 
  • Maximum head: 2.44m
  • Maximum system temperature: 60°C
  • Maximum flow rate: 200L/h
  • Voltage: 12V DC
  • Electrical connection: 4 pin Molex
  • Speed sensor: 3 pin Molex

Scope of Delivery:

  • 1x Alphacool Laing DDC310 pump
  • 1x Alphacool Laing DDC metal bottom - silver
  • 1x Alphacool Eisdecke Laing DDC plexi top V.2
  • Decoupling set
  • Mounting material

data sheet

Notice:

Attention: The manufacturer Mayhems advises that Mayhems fluids, especially the Aurora line of products, have been manufactured and distributed solely for show and modding purposes. These should not be utilized in the system for more than 14 days.

We would also like to advise that Mayhems fluids can damage water cooling products, and using Mayhems fluids can thereby void the warranties offered by the following manufacturers: Koolance, Phobya, Alphacool, Aqua Computer, Watercool.

Damages such as: clogging, corrosion of aluminium radiators, deterioration of glued containers, etc., are a consequence of the use of Mayhems, but will not be reimbursed by Mayhems. Use is therefore at one’s own risk.

Write a review

Please login or register to review

Alphacool Laing DDC310 - Complete Edition Eisdecke - plata/Acryl

  • Brand: AlphaCool
  • Product Code: 4250197131971
  • Availability: In Stock
  • ¥9,431

  • Ex Tax: ¥8,574

Tags: Alphacool, DDC310, ポンプ, リザーバー