※To operate the ACool (Alphacool ドイツ) Eisbaer 200 CPU - Black at least one 200 mm fan is required.
There are NO fans included in delivery!
The handling of the fan is here
Product Information
With the “Eisbaer”, ACool (Alphacool ドイツ) is fundamentally revolutionizing the AIO cooler market.
Where traditional AIO CPU-coolers are disposable products which are neither upgradeable nor refillable, the ACool (Alphacool ドイツ) “Eisbaer” is modularly built and can be upgraded, rebuilt or refilled at any time.
This means that the “Eisbaer” is not only an AIO, but also fully built on classic water cooling components.
That means it is quieter and more powerful than the average AIO solution.
Radiator
ACool (Alphacool ドイツ) depends on a radiator made of pure copper.
The base of the radiator is the popular ACool (Alphacool ドイツ) NexXxoS series, which is well-loved around the world.
The pure copper construction raises the cooling performance enormously compared to the usual aluminium radiators used in classic AIOs.
The slight thickness of the fins ensures enormous cooling power in fans with low rotational speed.
This ensures that the performance of the “Eisbaer” when adjusting the fans down decreases much more slowly than in radiators with higher fin thickness.
Hoses
The flexible PVC hoses make installing the “Eisbaer” easy.
These hoses are easier to arrange and move into the right position.
So the hoses don’t bend and stop the flow of the water, both hoses have been fitted with anti-kink springs.
The 11/8 mm size is also a standard in the water cooling field, alongside the 13/10 and 16/10.
Quick-lock closure
The “Eisbaer” was designed with expandability directly in mind.
This is why you’ll find a quick-lock closure on one of the hoses.
This quick-lock mechanism is compatible with ACool (Alphacool ドイツ) HF quick-lock closures (1010383, 1010394, 1010395, 1010442), with which the circuit can easily be expanded to include anything from a radiator to a graphics card cooler.
Furthermore, the “Eisbaer” is compatible with the upcoming ACool (Alphacool ドイツ) GPX-Pro graphics card AIO, which will use identical quick-lock closures.
Connectors
All connectors are based on the classic G1/4 inch thread, the standard thread in the water cooling field.
This way, all attachments can be switched out for others any time as desired.
This also means that, for example, you could later decide to switch to thicker hoses or even HardTubes and set your system uniquely apart.
All these features make the “Eisbaer” cooler into something extraordinary.
Its enhanced appearance from the illuminated logo and the illuminated reservoir, which also contains the pump, lets the interior of your PC shine in a whole new way.
The soft-touch surface of the pump case is a further visual highlight.
With the “Eisbaer”, you get an all-around perfect product that is not only extremely high-powered but also works very quietly.
Pumps
The basis of the pumps is the ACool (Alphacool ドイツ) DC-LT Ceramic Ultra Low Noise, also available separately.
The pump runs extremely quietly and can be regulated to between 7 and 12V. It can also be regulated through the motherboard.
If the “Eisbaer” is being run alone, the 7V setting will still have next to no performance loss, as shown in diverse test results.
The insulated pump case further perfects the noise generation and ensures that vibrations are almost completely absorbed.
The smooth and shiny polished copper base of the cooler ensures optimal heat absorption and can relay the heat over the fine slit structure of the cooler to the water quickly and efficiently.
Technical Details
Pump (ACool (Alphacool ドイツ) DC-LT 2600 Ultra low noise Ceramic)
- Speed: 2600 RPM
- Voltage: 7-13.5V DC
- Power consumption: 4W
- Maximum flow rate: 70L/h
- Maximum head: 0.85m
- hose length: approximately 40 cm
Scope of Delivery
- 1x ACool (Alphacool ドイツ) Eisbaer 200 CPU - Black
- 1x Intel Backplate
- 1x Intel bracket
- 1x AMD bracket
- Mounting material
- 1x Thermal paste
Compatibility Intel: LGA 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066
Compatibility AMD: AM4 / TR4 / sTRX4 / sWRX8
※To operate the ACool (Alphacool ドイツ) Eisbaer 200 CPU - Black at least one 200 mm fan is required.
There are NO fans included in delivery!
The handling of the fan is here
| Manufacturer: | ACool (Alphacool ドイツ) |
| Prefilled: | Yes |
| Radiator Thickness: | 45mm |
| CPU Performance: | Excellent |
| Hose dimensions: | 11/8mm |
| Radiator size: | 1x200mm |
| Socket: | LGA 1151 / 1200 / 1700 / 2011 / 2011-3 / 2066 AM4 / TR4 / sTRX4 / sWRX8 |
- Article no.: 1019173
- Manufacturer no.: 11762
- EAN: 4250197117623
- Weight: 3 kg
- Images may differ slightly from the original
The manufacturer's warranty period is valid for 2 years from the date of purchase. Please note that any defects will be determined by the manufacturer.
ACool Eisbaer 200 CPU - black
- Brand: ACool
- Product Code:4250197117623
- Availability:Please contact us
-
¥36,599
- Ex Tax:¥33,272









