Blog

Product information

The next generation - The Alphacool Eisblock Aurora water cooler for Geforce RTX 4XXX graphics cards. In order to dissipate the enormous heat of this graphics card generation in the best possible way, numerous optimizations have been made to the water cooler compared to the previous model. The fin structure was adapted and enables a very good water flow while increasing the cooling surface. The modified jet plate with improved inflow engine ensures an optimal distribution of the water on the cooling fins.

Technical Highlights
The fin structure of this Eisblock cooler generation was developed together with Nvidia board partners. The fin thickness is 0.4 mm, the distance between the cooling fins is 0.4 mm. This ensures a very good water flow while increasing the cooling surface. The jet plate has a revised inlay that spreads the water pressure better over the fins thus optimizing the heat absorption. The adjusted water inflow gives the water a better angle of inflow.

Chrome-plated copper
The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.

Design
The Aurora design of the Geforce RTX 4XXX Eisblock generation is visually calmer and simpler. Only one O-ring runs around the entire cooler. The design around the cooling fins and jetplate makes for a cleaner look. The illumination of the digitally addressable RGB LEDs is even better distributed throughout the cooler as a result of the chrome plating. The terminal's design is in line with the classic Aurora design.

Thermal paste & thermal pads
The included thermal compound is Alphacool's Subzero. With a thermal conductivity of 16 W/mK, it is one of the highest performing thermal pastes on the market. The electrically non-conductive thermal compund is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Alphacool Soft Pads with 1mm thickness are used on the voltage converter and the graphics memory. The thermal conductivity of the pads is 7 W/mK. The pads for the back of the PCB are 3mm thick and have a thermal conductivity of 3 W/mK.

Product information

The next generation - The Alphacool Eisblock Aurora water cooler for Geforce RTX 4XXX graphics cards. In order to dissipate the enormous heat of this graphics card generation in the best possible way, numerous optimizations have been made to the water cooler compared to the previous model. The fin structure was adapted and enables a very good water flow while increasing the cooling surface. The modified jet plate with improved inflow engine ensures an optimal distribution of the water on the cooling fins.

Technical Highlights
The fin structure of this Eisblock cooler generation was developed together with Nvidia board partners. The fin thickness is 0.4 mm, the distance between the cooling fins is 0.4 mm. This ensures a very good water flow while increasing the cooling surface. The jet plate has a revised inlay that spreads the water pressure better over the fins thus optimizing the heat absorption. The adjusted water inflow gives the water a better angle of inflow.

Chrome-plated copper
The cooler is made entirely of chrome-plated copper. A chrome plating is much harder than a nickel plating and therefore less sensitive to acids, scratches and damage. It completely eliminates the risk of chipping nickel plating. Additionally, chrome plating looks much more homogeneous and provides a shine that cannot be achieved by nickel plating. Chrome-plated coolers have previously only been used in the industrial sector in areas where extreme influences act on the coolers.

Design
The Aurora design of the Geforce RTX 4XXX Eisblock generation is visually calmer and simpler. Only one O-ring runs around the entire cooler. The design around the cooling fins and jetplate makes for a cleaner look. The illumination of the digitally addressable RGB LEDs is even better distributed throughout the cooler as a result of the chrome plating. The terminal's design is in line with the classic Aurora design.

Thermal paste & thermal pads
The included thermal compound is Alphacool's Subzero. With a thermal conductivity of 16 W/mK, it is one of the highest performing thermal pastes on the market. The electrically non-conductive thermal compund is particularly well suited for high contact pressures, but can still be processed perfectly due to its viscosity of 850,000 TF. Alphacool Soft Pads with 1mm thickness are used on the voltage converter and the graphics memory. The thermal conductivity of the pads is 7 W/mK. The pads for the back of the PCB are 3mm thick and have a thermal conductivity of 3 W/mK.

Note on application
Please use only in conjunction with clear transparent water cooling fluids. The particles and additives in Pastel liquids can clog and permanently damage water cooling products such as radiators, pumps, coolers and hoses. This can result in voiding the manufacturer's warranty as well.

manufacturer: Alphacool
Hardware Hersteller: NVIDIA
SLI kompatibel: Ja
Kühlertyp: Komplettkühler
connector: 4x G1/4"
Material Deckel: Acryl
dimensions: 232,30 x 145 x 34,17mm
Material bottom plate: Kupfer
Hinweis: Kompatibel bis 16/13mm gerade, Kompatibel bis 19/13mm gewinkelt
Hardware Modell: RTX 4080

 

 

Technical data cooler

manufacturer: Alphacool
Hardware Hersteller: NVIDIA
SLI kompatibel: Ja
Kühlertyp: Komplettkühler
connector: 4x G1/4"
Material Deckel: Acryl
dimensions: 232,30 x 145 x 34,17mm
Material bottom plate: Kupfer
Hinweis: Kompatibel bis 16/13mm gerade, Kompatibel bis 19/13mm gewinkelt
Hardware Modell: RTX 4080

 

オプション

  • 商品番号: 1023722
  • メーカー番号: 13549
  • EAN: 4250197135498
  • 重さ: 1,605 kg
  • 商品は画像と多少異なる場合がございます。

 

仕様書

マニュアル

NVIDIA互換性リスト

GPUコンフィギュレーター

 

メーカー保証期間はご購入日より2年間となります。
なお、不具合についてはメーカーの判断となりますので、予めご理解くださいませ。

レビューを書く

注意: HTMLタグは使用できません!
   悪い           良い

ACool Eisblock Aurora Acryl RTX 4080 AMP - Trinity バックプレート搭載

  • ブランド: ACool
  • 品番:4250197135498
  • 在庫:お問い合わせ下さい
  • ¥27,880

  • 税別:¥25,345

関連商品

ACool Eisplateau 静電気防止ワーク&マウントマット120x60cm

ACool Eisplateau 静電気防止ワーク&マウントマット120x60cm

商品番号: 1012118 メーカー番号: 90334 EAN: 4250197136457 重さ: 1785 g 商品は画像と多少異なる場合が..

¥10,111 税別:¥9,192

ACool HF コンプレッションフィッティング TPV - 12,7/7,6mm ストレート - ブラック - 6個入り(ソフトチューブ)

ACool HF コンプレッションフィッティング TPV - 12,7/7,6mm ストレート - ブラック - 6個入り(ソフトチューブ)

商品仕様: 1016781 メーカー番号:17453 EAN: 4250197174534 重さ: 0,047 kg 商品は画像と多少異なる場合がございます。..

¥2,790 税別:¥2,536

ACool Eiszapfen スクリュープラグ V.2 G1/4 - ディープブラック

ACool Eiszapfen スクリュープラグ V.2 G1/4 - ディープブラック

商品番号: 17468 EAN: 4250197174688 重さ: 0,005 kg 商品は画像と多少異なる場合がございます。..

¥802 税別:¥729

ACool Eisblock Aurora Acryl RTX 4080 Suprim バックプレート搭載

ACool Eisblock Aurora Acryl RTX 4080 Suprim バックプレート搭載

記事番号.: 1023644 メーカー番号: 13527 EAN: 4250197135276 重量: 1905 g 商品は画像と多少異なる場合..

¥25,367 税別:¥23,061

ACool Eisblock Aurora Acryl RTX 4080 Strix バックプレート搭載

ACool Eisblock Aurora Acryl RTX 4080 Strix バックプレート搭載

記事番号.: 1023660 メーカー番号: 13530 EAN: 4250197135306 重量: 1640 g 商品は画像と多少..

¥27,893 税別:¥25,357

ACool Eisblock Aurora Acryl RTX 4080 AMP - Trinity バックプレート搭載

ACool Eisblock Aurora Acryl RTX 4080 AMP - Trinity バックプレート搭載

商品番号: 1023722 メーカー番号: 13549 EAN: 4250197135498 重さ: 1,605 kg 商品は画像と多少異なる場..

¥27,880 税別:¥25,345

タグ: Acool, Alphacool, GPUクーラー, 4080, 4090