Send Email
  • Noctua
  • iStarUSA Chassis
  • AlphaCool Eissturm
Flat Fee Banner

Noctua NF-A20 FLX 800RPM 3pin 200mm fan
[NF-A20 FLX]

  • NF-A20 FLX
  • NF-A20 FLX
  • NF-A20 FLX
  • NF-A20 FLX
  • NF-A20 FLX
  • Large 200mm diameter for high airflow performance at extremely low noise levels, three sets of mounting holes (154x154, 170x170 & 110x180mm)
  • 4-pin PWM version for automatic speed control via 4-pin PWM fan headers, 800rpm maximum speed (550rpm with supplied Low-Noise Adaptor)
  • Includes the latest version of Noctua's advanced Smooth Commutation Drive 2
  • Trusted Noctua quality backed up with 6-year manufacturer’s warranty
    • Stock Status: Low Stock Available

      Click here for a quote

      The NF-A20 is a highly optimised, premium quality quiet 200mm fan. Featuring an AAO (Advanced Acoustic Optimisation) standard frame as well as sophisticated aerodynamic design measures such as Flow Acceleration Channels, the NF-A20 brings the renowned quiet cooling performance of Noctua’s award-winning A-series to the increasingly popular 20cm form factor. The FLX version provides 800/550rpm speed settings via the supplied Low-Noise Adaptor in order to provide full flexibility in fine-tuning the fan for maximum ventilation performance or near-silent operation. Its superb running smoothness, reference-class SSO2 bearing and Noctua’s trusted premium quality make the NF-A20 an elite choice for the highest demands.
      Award-winning Noctua quality in 20cm size Award-winning Noctua quality in 20cm size
      While more and more PC cases support 20cm intake, side-panel or exhaust fans, many of the bundled stock units and available aftermarket options are of questionable quality. By contrast, the NF-A20 is a true premium grade solution worthy of Noctua’s award-winning A-series.
      154mm, 110x180mm and 170mm hole spacing 154mm, 110x180mm and 170mm hole spacing
      In order to ensure broad compatibility with today’s PC cases, the NF-A20 features three sets of mounting holes: While the 154x154mm and 110x180mm spacing allow it to replace most 200mm fans, the 170x170mm spacing is used by many 230 and 250mm fans, which can thus also be replaced by the NF-A20.*

      Flow Acceleration Channels Flow Acceleration Channels
      The NF-A20 impeller features suction side Flow Acceleration Channels. By speeding up the airflow at the crucial outer blade regions, this measure reduces suction side flow separation and thus leads to better efficiency and lower vortex noise.
      AAO Frame AAO Frame
      Noctua's AAO (Advanced Acoustic Optimisation) frames feature integrated anti-vibration pads as well as Noctua's proprietary Stepped Inlet Design and Inner Surface Microstructures, both of which further refine the fan's performance/noise efficiency.

      Stepped Inlet Design Stepped Inlet Design
      Noctua's Stepped Inlet Design adds turbulence to the influx in order to facilitate the transition from laminar flow to turbulent flow, which reduces tonal intake noise, improves flow attachment and increases suction capacity, especially in space-restricted environments.

      Inner Surface Microstructures Inner Surface Microstructures
      With the tips of the fan blades ploughing through the boundary layer created by the Inner Surface Microstructures, flow separation from the suction side of the blades is significantly suppressed, which results in reduced blade passing noise and improved airflow and pressure efficiency.

      Integrated anti-vibration pads Integrated anti-vibration pads
      Integrated anti-vibration pads made from extra-soft silicone minimise the transmission of minute vibrations while maintaining full compatibility with all standard screws and other mounting systems.

      Smooth Commutation Drive 2 Smooth Commutation Drive 2
      The latest version of Noctua's advanced Smooth Commutation Drive system ensures superb running smoothness by eliminating torque variations and switching noises. This makes the fan remarkably quiet even at very close distances.

      Low-Noise Adaptor Low-Noise Adaptor
      The NF-A420 FLX (Flexibility) is supplied with a Low-Noise Adaptor (L.N.A.) that reduces the maximum fan speed from 800 to 550rpm so that it can be fine-tuned for superior airflow or maximum quietness.

      Extensive cabling options Extensive cabling options
      The fan's short 20cm primary cable minimises cable clutter in typical applications while the supplied 30cm extension provides extended reach when necessary. Both cables are fully sleeved and a 4-pin y-cable allows the connection of a second fan to the same PWM fan header for automatic control.

      SSO2 bearing SSO2 bearing
      The NF-A20 features the further optimised second generation of Noctua's renowned, time-tested SSO bearing. With SSO2, the rear magnet is placed closer to the axis to provide even better stabilisation, precision and durability.

      6-year manufacturer’s warranty 6-year manufacturer’s warranty
      Noctua fans are renowned for their impeccable quality and outstanding longevity. Like all Noctua fans, the NF-A20 features an MTTF of more than 150.000 hours rating and comes with a full 6-year manufacturer’s warranty.

      *As there is no fixed industry standard for the size or hole spacing of 200mm, 220mm, 230mm or 250mm fans, please carefully check both the hole setup of your chassis and the available space (the NF-A20 is 30mm thick whereas some other 200mm fans are only 20mm!) in order to verify that the NF-A20 is compatible with your chassis. In case of doubt, please contact your chassis manufacturer.
      FAN Specification

      Size 200x200x30 mm
      Mounting hole spacing 154x154, 110x180, 170x170 mm
      Connector & pin-configuration 3-Pin PWM
      Bearing SSO2
      Blade Geometry A-Series with Flow Acceleration Channels
      Frame Technology AAO (Advanced Acoustic Optimisation)
      Rotational Speed (+/- 10%) 800 RPM
      Rotational Speed with L.N.A. (+/- 10%) 550 RPM
      Airflow 146,9 m³/h
      Airflow with L.N.A. 100,8 m³/h
      Acoustical Noise 18,1 dB(A)
      Acoustical Noise with L.N.A. 10,7 dB(A)
      Static Pressure 1,08 mm H₂O
      Static Pressure with L.N.A. 0,51 mm H₂O
      Max. Input Power 0,96 W
      Max. Input Current 0,08 A
      Operating Voltage 12 V
      MTTF > 150.000 h
      Scope of Delivery
      • Low-Noise Adaptor (L.N.A.)
      • 3:4-pin y-cable
      • 30cm extension cable
      • NA-AV3 anti-vibration mounts
      • NA-AV4 anti-vibration mounts
      • Fan screws
      Warranty 6 years

4 + 1 Set Banner
Quick Find
Use keywords to find the product you are looking for.
Advanced Search
Beginner Button
Avira Partner LogoPayment List
0 items
Manufacturer Info
Noctua Homepage
Other products
Japanese English
Follow Us On Twitter
Follow Us On Faceboot
Find us on amazon
Send Email
Hosting ServGate

Find Us On Google+
Norton Secured Peplink Certified Partner TRENDNet Authorised Distributor

Valid XHTML 1.0 Transitional BitDefender Partner Website Security Test

Wildcard SSL Certificates