Send Email
  • AlphaCool Eissturm
  • iStarUSA Chassis
  • Noctua
 
Flat Fee Banner
¥13,964(税込)

Watercool HEATKILLER Tube 150 D5
[4251312602550]

  • 4251312602550
  • 4251312602550
  • 4251312602550
  • 4251312602550
  • 4251312602550
  • Article no.: 1013023
  • Manufacturer no.: 30204
  • EAN: 4251312602550
  • Weight: 0,911 kg

Images may differ slightly from the original

在庫状況: 在庫なし

在庫なし

お問い合わせください



お見積書を作成する

Product Information

The HEATKILLER® Tube Series is a modular series of high end reservoirs with a glass tube made from borosilicate glass. It has some outstanding features which are listed here.

Large filling mouth
Thanks to a large filling mouth and a bayonet catch lid the HEATKILLER® Tube Series reservoirs can be opened without any tools and is easy to fill. It has never been easier to re-fill a cooling medium.

Borosilicate glass tube
Borosilicate is a glass with very high chemical and thermic resistance. It is scratch-resistant and has very low heat expansion. These outstanding features make borosilicate an ideal material for reservoirs.

Three sizes
To account for different space availability in current cases, the HEATKILLER® Tube Series reservoir glass tubes are available in sizes 100mm, 150mm and 200mm.

Three versions
Besides a standalone version, there are versions with direct connections for pumps. They support D5 and DDC pumps by Lowara (formerly known as Laing) and their derivatives.

Large volume
In designing the HEATKILLER® Tube Series, we took great care not to waste any of the available volume. That makes the HEATKILLER® Tube Series reservoirs very low maintenance, because they need fewer re-fills.

Anti- Cyclone-effect
The exclusively developed anti-cyclone-inlay which is located at the bottom of the reservoir prevents vortices that easily form in reservoirs. This reduces noise levels and makes air bleeding easier.

Streaming-optimized pump chambers
The pump adapter for D5 and DDC pumps comes with a streaming optimized pump chamber. This causes fewer vortices during use, which has a positive effect on both flow rate and air bleeding.

Made in Germany
The HEATKILLER@ Tube Series reservoirs are completely produced in Germany.

Extensive optional accessories
The HEATKILLER@ Tube Series reservoirs have various optional features, for example:

Variable Mounting systems
For optimal integration into a water cooled system we offer different mounting systems to fit your build.

…horizontal mount (pedestal)
Two different height pedestals are available for mounting the HEATKILLER@ Tube Series reservoir to the case floor or free-standing.

… vertical mount
A multifunctional bracket mount offers options for vertical montage. Several adapters are available. Some can be used to attach the reservoir to 120x120mm or 140x140mm cooler slots. Others allow for a montage of the reservoir on a radiator from the MO-RA3 series.

Illumination
HEATKILLER@ Tube Series reservoirs can be set in scene with LED illumination. We offer splash-safe LED strips in various colors. The strips are hidden in the struts of the reservoir cage.

Colored struts
To customize your HEATKILLER@ Tube Series you can exchange the default struts. We offer aluminum struts in natural color or with a choice of anodized colors.

Technical data:

  • Material cover: POM
  • Material struts: black anodized aluminium
  • Tube: borosilicate glass
  • Material bottom: POM
  • Material Inlay: stainless steel
  • Measurements (LxWxH): 70 x 70 x 253,4 mm
  • Tube length: 150mm
  • Tube diameter: 65mm
  • Capacity: aprox. 375ml
  • Weight: aprox. 790g
  • Seal: NBR, VMQ
  • Connection thread: 2x G ¼ inch (DIN ISO 228-1)

Scope of delivery:

  • 1x HEATKILLER® Tube 150 D5
  • 1x manual

 

Here you can download the Assembly Instructions

Product Information

The HEATKILLER® Tube Series is a modular series of high end reservoirs with a glass tube made from borosilicate glass. It has some outstanding features which are listed here.

Large filling mouth
Thanks to a large filling mouth and a bayonet catch lid the HEATKILLER® Tube Series reservoirs can be opened without any tools and is easy to fill. It has never been easier to re-fill a cooling medium.

Borosilicate glass tube
Borosilicate is a glass with very high chemical and thermic resistance. It is scratch-resistant and has very low heat expansion. These outstanding features make borosilicate an ideal material for reservoirs.

Three sizes
To account for different space availability in current cases, the HEATKILLER® Tube Series reservoir glass tubes are available in sizes 100mm, 150mm and 200mm.

Three versions
Besides a standalone version, there are versions with direct connections for pumps. They support D5 and DDC pumps by Lowara (formerly known as Laing) and their derivatives.

Large volume
In designing the HEATKILLER® Tube Series, we took great care not to waste any of the available volume. That makes the HEATKILLER® Tube Series reservoirs very low maintenance, because they need fewer re-fills.

Anti- Cyclone-effect
The exclusively developed anti-cyclone-inlay which is located at the bottom of the reservoir prevents vortices that easily form in reservoirs. This reduces noise levels and makes air bleeding easier.

Streaming-optimized pump chambers
The pump adapter for D5 and DDC pumps comes with a streaming optimized pump chamber. This causes fewer vortices during use, which has a positive effect on both flow rate and air bleeding.

Made in Germany
The HEATKILLER@ Tube Series reservoirs are completely produced in Germany.

Extensive optional accessories
The HEATKILLER@ Tube Series reservoirs have various optional features, for example:

Variable Mounting systems
For optimal integration into a water cooled system we offer different mounting systems to fit your build.

…horizontal mount (pedestal)
Two different height pedestals are available for mounting the HEATKILLER@ Tube Series reservoir to the case floor or free-standing.

… vertical mount
A multifunctional bracket mount offers options for vertical montage. Several adapters are available. Some can be used to attach the reservoir to 120x120mm or 140x140mm cooler slots. Others allow for a montage of the reservoir on a radiator from the MO-RA3 series.

Illumination
HEATKILLER@ Tube Series reservoirs can be set in scene with LED illumination. We offer splash-safe LED strips in various colors. The strips are hidden in the struts of the reservoir cage.

Colored struts
To customize your HEATKILLER@ Tube Series you can exchange the default struts. We offer aluminum struts in natural color or with a choice of anodized colors.

Technical data:

  • Material cover: POM
  • Material struts: black anodized aluminium
  • Tube: borosilicate glass
  • Material bottom: POM
  • Material Inlay: stainless steel
  • Measurements (LxWxH): 70 x 70 x 253,4 mm
  • Tube length: 150mm
  • Tube diameter: 65mm
  • Capacity: aprox. 375ml
  • Weight: aprox. 790g
  • Seal: NBR, VMQ
  • Connection thread: 2x G ¼ inch (DIN ISO 228-1)

Scope of delivery:

  • 1x HEATKILLER® Tube 150 D5
  • 1x manual

 

Here you can download the Assembly Instructions

Technical details

Material:Aluminium, borosilicate glass
Color:Transparent
Preinstalled pump:No
Connector:G1/4" inner thread
LED hole:Not available
Manufacturer:Watercool
Model of reservoir:Tubing - reservoirs 60mm
Pump compatibility:For 1x D5
Number of connections:2
Fillport:Not available
Volume:375ml
Dimensions:70 x 70 x 253,4mm (inkl. Pumpe)
レビュー




4 + 1 Set Banner
クイック検索
 
探したい製品のキーワードを入力してください。
高度な検索
Beginner Button
Avira Partner LogoPayment List
メーカー
言語
Japanese English
通貨
Follow Us On Twitter
Follow Us On Faceboot
Find us on amazon
Send Email
Hosting ServGate

Find Us On Google+
Norton Secured Peplink Certified Partner TRENDNet Authorised Distributor

Valid XHTML 1.0 Transitional BitDefender Partner Website Security Test

Wildcard SSL Certificates