Trendnet TV-VS1P - Single Channel PoE Analog to IP Video Encoder
[TV-VS1P (Version v1.0R)]

Provides advanced IP-based functionality to an analog CCTV camera
View a CCTV camera from any Internet connection and on compatible mobile phones
No need to install this device near a power source, power and data are received through a single Ethernet cable
Motion detection recording, email alerts, and alarm triggers
Schedule recording sessions to a server with Samba client support

Stock Status:

Click here for a quote

Overview

Features

Specifications

TRENDnet's Single Channel PoE Analog to IP Video Encoder, model TV-VS1P, provides advanced IP-based camera functionality to a traditional analog CCTV camera.

Convert analog video to digital; view video over any internet connection; record video to a server; and manage motion detection recording and email alerts. No need to install this device near a power source, power and data are received through a single Ethernet cable.

The TV-VS1P converts analog video to resolutions of up to 704 x 480 pixels (4CIF) at 30 frames per second for H.264, MPEG-4, or MJPEG compressed video. Two-way audio support facilitates audio recording and two-way communications. Remote Pan/Tilt/Zoom and Auto Patrol is supported for Pelco D compliant PTZ cameras. Advanced features include motion detection recording, email alerts, scheduled recording sessions, 3GPP support, Samba client support, Input/Output ports to network to alarm systems, date-and-time and other text overlays, mask overlays to conceal sensitive areas, an SD card slot, and digital zoom. This compact device can be mounted on most surfaces.

IEEE 802.3af PoE compliant device
1 x 10/100Mbps PoE Auto-MDIX RJ-45 port
Optional power port for non-PoE installations
SD/SDHC card slot *
BNC video out and video in connectors
Audio support: built-in Audio jacks for additional 3rd party microphone and speaker
Input/Output ports (GPIO) to network to alarm systems
Diagnostic Power and Link LEDs
Four installation mounting points
3x digital zoom
Pelco D and Pelco P pan/tilt/zoom support: Define Auto-Patrol pan tilt with up to 32 viewing nodes
High quality H.264, MPEG-4, and MJPEG video recording
Resolution up to 704 x 576 pixels and up to 30 frames per second (fps)
Stream Network camera video to a 3GPP compatible wireless device
Dynamic DNS support
Images controls: brightness, saturation, contrast, Hue ,and Wide Dynamic Range Correction (WDRC)
Time, date, and other text overlays
Mask overlays conceal sensitive areas
Supports TCP/IP networking, SMTP Email, HTTP, and other Internet protocols
Recording type: continuous, schedule, or motion detection
Record streaming video to your computer or Network Storage device with Samba support
Three motion detection windows with just-in-time snapshot , motion detection triggered email alerts, and image upload to FTP
Event trigger: motion detection or Input/Output signal
Event response: email alert, instant snapshot, or video recording
Send instant messages to Jabber client via Jabber Server
Supports Quality of Service (QoS) with Differentiated Services Code Point (DSCP)
Quick Universal Plug and Play (UPnP) installation
3-year limited warranty

* SD/SDHC card sold separately

General
Video
Video In: CVBS / 1 Vp-p±0.2 / 75 Ohms; BNC connecter
Video Out: CVBS /1 Vp-p /75 Ohms; BNC connecter
Audio
Line Input: 3.5mm jack (CCTP audio)
Line Output: 3.5mm jack (Speaker)
S/N Ratio: < 60dB
Format: PCM/AMR
2 Way audio supported
GPIO
Ground, GPIO in/out, DV12V output, RS485 TX+/TX-
SD Slot
Supports SD/SDHC (up to 32GB)
Pan/Tilt/Zoom
Protocol: Pelco D and Pelco P32 presetsAuto Patrol
Hardware
Network
IEEE 802.3u 10/100Mbps Fast Ethernet, Auto-MDIXIEEE 802.3af PoE
LED
Power, Link
Reset Button
Push and release to rebootPush and hold for 5 seconds to restore to factory default
Power Consumption
7 Watts
Power
12V, 1.5A external power adapter (for non-PoE installation)
Dimension
160 x 109 x 36 mm (6.3 x 4.3 x 1.4 in.)
Weight
445 g (15.7 oz.)
Temperature
Operating: 0°C ~ 45°C (32°F ~ 113°F)
Storage: -15°C ~ 60°C (5°F ~ 140°F)
Humidity
Max. 85% (non-condensing)
Certifications
CE, FCC
Requirement
Management Interface
Internet Explorer 6.0 or above
To run Utility
Windows 7(32/64-bit), Vista(32/64-bit), XP(32/64-bit)
Network Protocols
TCP/IP, IPv4/IPv6, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, HTTPs, Samba, PPPoE, UPnP, Bonjour, RTP, RTSP, RTCP
Management
Remote
Remote management supported
Backup / Restore
Save/retrieve configuration files
Settings
Image
Brightness, contrast, saturation, mirror (horizontal/vertical)
Video Encoder
Encoding type: H.264, MPEG4, MJPEGResolution/frame rate(auto-sensing)704 x 480, 352 x 240, 176 x 120, up to 30 fps (NTSC)
704 x 576, 352 x 288, 176 x 144, up to 25 fps (PAL)
Compression: 5 levels
Recording
Recording type: continuous, schedule, or motion detection
Port Settings
HTTP port: 80 (default), RTSP (554)
Digital Zoom
3x
Dynamic DNS
Yes
Time
Synchronize with NTP server or set time/date manually
SMTP
Supported up to 2 destination accounts
System Log
100 items